Tomato Mesh Belt Drying Machine

Tomato Mesh Belt Drying Machine

The Tomato Mesh Belt Drying Machine provides continuous multi-layer hot-air drying for tomato halves, slices, dice, and pieces. Adjustable feeding, belt speed, temperature, residence time, and heat-source options allow the line to be configured around raw-material condition, loading depth, evaporation demand, final product requirements, and downstream cooling or packing.
Send Inquiry
Description
Technical Parameters

Tomato Mesh Belt Drying Machine

A tomato mesh belt drying machine is a continuous hot-air system for reducing moisture in tomato halves, slices, dice, and prepared pieces. Product travels through several conveyor layers while controlled air passes through the material bed. Compared with tray-by-tray handling, this arrangement supports steady feeding, repeatable residence time, and automatic discharge into a cooling or packing stage.

AGICO configures the line around the tomato form, incoming moisture, loading depth, target final condition, plant utilities, and required output. These details matter because a thin slice and a dense half do not dry at the same rate. We therefore treat capacity as an engineering result, not a fixed promise independent of raw material and operating conditions. A representative trial can also reveal sticking, color change, shrinkage, or breakage that is difficult to predict from a capacity figure alone.

AGICO Technical Data

Parameter Common Specification
Processing Capacity 200–3,000 kg/h
Drying Temperature 40–120°C
Drying Time 0.5–5 hours
Conveyor Layers Typically 4 layers; customizable
Material Spreading Thickness 50–200 mm
Belt Width Commonly 1.2–2.0 m
Drying Section Length Commonly 6–12 m
Water Evaporation Capacity Approximately 100–750 kg H₂O/h, depending on configuration
Installed Power Approximately 11–153 kW, depending on size and heat source
Conveyor Speed Variable-frequency adjustable
Heating Methods Electricity, natural gas, LPG, diesel, steam, biomass, coal, or wood
Airflow Method Forced hot-air circulation through multiple conveyor layers
Feeding / Discharge Continuous inclined-belt feeding / automatic continuous discharge
Contact Material Food-grade stainless steel
Control System Temperature, conveyor speed, and drying-time control
Suitable Tomato Forms Halved tomatoes, tomato slices, diced tomatoes, and tomato pieces
Other Applications Peppers, onions, garlic, potatoes, carrots, mushrooms, herbs, and sliced fruits

The ranges above cover multiple machine sizes and heat-source arrangements. Final capacity, evaporation load, installed power, dimensions, and utilities must be confirmed against a representative tomato sample and the agreed process before quotation.

Practical Features for Continuous Tomato Drying

Multi-Layer Belt Path

Several mesh conveyors provide a long residence path without requiring one unusually long floor-level belt. Transfers between layers turn and redistribute the product, helping expose new surfaces to moving air.

Adjustable Loading

Feed rate, spreading thickness, and belt speed work together. Stable loading reduces dense zones that retain moisture and thin zones that over-dry. The objective is an even bed, not simply the deepest possible bed.

Forced Hot-Air Circulation

Fans move heated air through the mesh and tomato bed. Air volume, direction, exhaust, and recirculation are selected to remove released moisture while using available heat efficiently.

Coordinated Process Control

Temperature, belt speed, and residence time must be adjusted as a system. Operators can record a proven recipe for each tomato format and revise it when thickness, maturity, or incoming moisture changes.

Four Decisions That Define the Configuration

1. Tomato Form

Specify halves, slices, dice, or irregular pieces, including the typical dimensions and allowable variation. Smaller pieces usually release moisture faster but may be more vulnerable to sticking or breakage.

2. Spreading Thickness

The stated 50–200 mm range is a configuration reference. The practical setting depends on permeability, slice geometry, surface moisture, and whether pieces overlap.

3. Available Heat Source

AGICO can discuss electric, gas, steam, biomass, or other heating arrangements. Fuel availability, energy cost, cleanliness requirements, and local emission rules influence the choice.

4. Final Condition and Throughput

Define inlet moisture, target moisture or texture, hourly feed, operating hours, and downstream cooling or packing. These values allow the evaporation load to be calculated realistically.

From Prepared Tomato to Stable Dried Product

Tomato dryer feed belt operation

Preparation and Controlled Loading

Wash, inspect, and cut tomatoes before drying. Drain surface water and remove unsuitable pieces. The inclined feed conveyor should deliver material steadily across the usable belt width; a level, open bed gives hot air a more consistent path.

Dried tomato slices after mesh belt drying

Cooling, Inspection, and Packing

Dried tomato should be cooled before sealed packing so residual heat does not create condensation. Inspect color, texture, moisture uniformity, and fines, then protect the product from humidity during transfer and storage.

Working Process and Operating Checks

Tomato multi-belt dryer hot-air flow diagram
01 Feed

Prepared tomato enters by inclined conveyor and is spread across the first mesh belt. Check that the bed is even and that pieces are not entering in compacted surges.

02 Transfer

As the product moves between conveyor layers, it is turned and redistributed. Belt speed establishes residence time and should be matched to the selected loading depth.

03 Dry

Heated, forced air passes through the mesh and material. Moisture-laden air is exhausted or partly recirculated according to the process design; temperature can be staged to protect color and texture.

04 Discharge

Product leaves continuously for cooling, inspection, and packing. Sampling at planned intervals confirms whether moisture and texture remain within the buyer's specification.

Cleaning and routine control

Before cleaning, isolate power and allow the heating section to cool. Remove tomato residue from the feed area, mesh belts, transfers, air passages, and discharge. Inspect belt tracking, tension, fan condition, sensors, seals, and accessible food-contact surfaces. A simple production log should record tomato format, loading depth, temperature zones, belt speed, drying time, and final moisture result. This gives operators a dependable starting recipe and helps AGICO diagnose process changes without guesswork.

Frequently Asked Questions

Can the same dryer handle slices, halves, and dice?

Yes, if the belt loading and drying recipe are adjusted. Each format should be tested because thickness, exposed surface, and overlap change the drying rate.

How is capacity selected?

Capacity is based on feed rate and required water evaporation. Provide inlet and target moisture, tomato dimensions, operating hours, and expected ambient conditions for sizing.

Which heat source is best?

There is no universal answer. The best option depends on local energy availability, cost, hygiene requirements, temperature control, and emission constraints.

Can the line connect to upstream and downstream equipment?

Yes. Feed and discharge heights, conveyor widths, controls, cooling, and packing interfaces should be defined before layout confirmation.

What information should be sent with an inquiry?

Send photos or samples, cut dimensions, hourly input, inlet and target moisture, preferred heat source, voltage, available floor space, and required final product quality. This lets AGICO propose a practical configuration rather than a generic machine size.

 

Hot Tags: tomato mesh belt drying machine, China tomato mesh belt drying machine manufacturers, suppliers, factory

Send Inquiry
Send Inquiry