Coconut Cutter Machine

Coconut Cutter Machine

Semi-automatic SUS304 coconut halving machine with an approximate 30 coconuts/min capacity, powered vertical cutting, foot-pedal and push-button control, coconut-water collection, and optional line configurations.
Send Inquiry
Description
Technical Parameters
Coconut cutter machine loading and cutting area
Industrial Coconut Cutter Machine Overview

The AGICO coconut cutter machine is a semi-automatic unit for halving prepared coconuts with a powered vertical blade. An operator loads one coconut into the shaped holding area, initiates the cutting action with the push-button and foot-pedal controls, and removes the two finished halves. This combination keeps product positioning under direct operator control while the 1.5 kW drive performs the cut.

The machine is intended for young coconuts, peeled green coconuts, and mature coconuts that fit the agreed feed condition. Its approximate processing capacity is 30 coconuts per minute, but actual output depends on coconut size and firmness, peeling condition, operator rhythm, product positioning, removal time, and the organization of upstream and downstream handling. Buyers should therefore treat the stated rate as a selection reference and confirm representative raw material before final configuration.

Key Features for Controlled Coconut Halving
  • Powered Vertical Halving

    A high-strength stainless steel blade, approximately 10 mm thick, moves through the positioned coconut to produce two halves. Product condition and accurate placement still influence the final cut, so samples should be reviewed when appearance or dimensional consistency is important.

  • Manual Feed with Direct Control

    Push-button and foot-pedal controls support a practical operator sequence while leaving loading and unloading manual. The arrangement is suitable for sites that prefer a compact halving station without claiming unattended or fully automatic feeding.

  • SUS304 Machine Construction

    The machine is specified with food-grade SUS304 stainless steel construction. Buyers should align the cleaning method, water quality, detergent choice, and inspection routine with the processed coconut and local hygiene plan.

  • Water Collection and Mobility

    An integrated stainless steel tray collects released coconut water at the cutting station. Lockable caster wheels help position the approximately 130 kg unit, while final operating placement should remain level, stable, and clear of pedestrian routes.

Technical Data and Configuration

Use the following data to check utilities, access, floor space, labor, cleaning clearance, and compatibility with the intended coconuts. Optional items should be defined during quotation rather than assumed to be included in the standard machine.

Parameter Specification
Machine Type Semi-automatic coconut halving machine
Processing Capacity Approx. 30 coconuts/min
Motor Power 1.5 kW
Voltage 380V, 50Hz, 3 Phase
Machine Material Food-grade SUS304 stainless steel
Blade Material High-strength stainless steel
Blade Thickness Approx. 10 mm
Machine Dimensions Approx. 810 × 630 × 1300 mm
Net Weight Approx. 130 kg
Cutting Method Powered vertical halving
Finished Product Two coconut halves
Suitable Materials Young coconuts, peeled green coconuts and mature coconuts
Feeding Method Manual loading
Control Method Push-button and foot-pedal control
Coconut-Water Collection Integrated stainless steel collection tray
Mobility Lockable caster wheels
Optional Configuration Customized voltage, water storage tank or conveying system

Confirm coconut diameter, outer condition, maturity, and target half appearance with AGICO before ordering.

Verify the local electrical supply; customized voltage is optional rather than part of the standard 380V specification.

Allow safe space for manual feeding, half removal, tray handling, blade inspection, and sanitation.

Define any water tank or conveyor connection with the full line layout and expected operating rhythm.

Applications and Line Integration

The cutter can work as a compact station or as one controlled step in a broader coconut processing arrangement.

Standalone Preparation Station

For small and medium processors, an operator can receive peeled coconuts, halve them, place the halves into food-grade containers, and route collected water separately. The station layout should prevent incoming and cut product from crossing.

Coconut-Meat Processing Preparation

Halving can prepare coconuts for later meat removal, trimming, shredding, drying, or other buyer-defined operations. Downstream labor and container capacity should be balanced with the approximate cutting rate so finished halves do not accumulate unsafely.

Integrated Processing Line

The machine may be coordinated with washing, peeling, conveying, water storage, or collection equipment. AGICO reviews feed height, transfer direction, staffing, utilities, drainage, and cleaning access before defining optional connections.

Working Process, Cleaning, and Changeover

01

Prepare the feed. Confirm that each coconut matches the agreed size and preparation condition. Remove loose debris and reject damaged or unsuitable pieces according to the site procedure.

Top view of coconut cutter blade and holding area

02

Load and position. Place one coconut securely in the holding area. Keep hands and loose items outside the blade path, and use only the operating method supplied with the machine.

03

Initiate the cut. Use the push-button and foot-pedal controls as instructed. The powered vertical blade divides the product into two halves while released liquid drains toward the integrated collection tray.

04

Remove and route the halves. After the cutting motion has completed and the area is safe, remove both halves and place them into the next controlled handling step. Monitor tray level and transfer collected coconut water using the site's hygiene procedure.

05

Isolate, clean, and inspect. Stop and electrically isolate the unit before cleaning or blade-area inspection. Remove product fragments, clean accessible SUS304 surfaces and the collection tray, protect electrical parts from unsuitable washdown, and check the blade, holder, controls, and casters before restart or product changeover.

Help FAQ
Coconut Cutter Machine FAQ
  • Which coconuts can this machine cut?

    It is specified for young coconuts, peeled green coconuts, and mature coconuts. Send representative dimensions, photos, maturity details, and the current peeling condition so suitability can be reviewed.

  • Is the machine fully automatic?

    No. It is semi-automatic with manual loading and removal. The powered blade performs vertical halving, while an operator positions each coconut and manages the finished halves.

  • Is 30 coconuts per minute guaranteed?

    The specification is approximately 30 coconuts per minute. Actual performance varies with product size, hardness, preparation, positioning, operator rhythm, and downstream handling.

  • What electrical supply is required?

    The standard data is 380V, 50Hz, three phase with 1.5 kW motor power. Confirm local voltage and frequency before ordering; customized voltage is listed as an optional configuration.

  • How is coconut water handled?

    An integrated stainless steel tray receives liquid released during cutting. The buyer should define hygienic transfer, temporary storage, filtration if required, and the cleaning procedure. A water storage tank can be discussed as an option.

  • What information is needed for a quotation?

    Provide coconut type and dimensions, photos of the prepared feed, required half appearance, hourly or shift target, electrical standard, room layout, cleaning method, water-handling plan, and any conveyor or tank requirement. AGICO can then review the standard unit and optional line connections.

 

Hot Tags: coconut cutter machine, China coconut cutter machine manufacturers, suppliers, factory, AI Fruit Grading Machine, Grape Sorting Machine, Lettuce Chopping Machine, Pear Chopping Machine, Plum Processing Pitting Machine, Pomegranate Aril Processing Equipment

Send Inquiry
Send Inquiry